Expert Answers about Prime Time

• Troubleshooting Non-Function Arms On A Solera Smart Arm RV Awning
• If the light is off on the controller for your Solera Awning # LC517517 then either the controller is bad or you just have a simple power issue. I recommend tracing the wiring to the power source and using a multimeter # PT89ZR to see if the line has power. If not, then your power source may need to be recharged or there could be a blown in-line fuse that needs to be replaced to allow power to pass to the controller. Unfortunately with this style system the controller needs to be on the...
  view full answer...


• Troubleshooting Running Light Circuit On 2018 Prime Time Fury Toy Hauler Not Powering Back Up Camera
• I would be happy to help! It sounds like you have a bad ground, as OL on a multimeter means Open Loop which is no continuity. I would move the ground wire to a different location that is corrosion and paint free metal. I would highly doubt that the center market light on your 2018 Prime Time Fury Toy Hauler is not 12v, as I am unaware of any trailer manufacturers using 6 volt lights anymore. Once you relocate the ground to a better surface, let me know if the camera starts working. I...
  view full answer...


• Troubleshooting Slack in Performance for Demco Hijacker Autoslide
• If you have been upkeeping with the care and maintenance on your 18K Demco Hijacker Autoslide # DM8550034 it sounds like you might need to mess with the gear adjustment bolt located on the cab-end of the Hijacker. To do this you need to place the hitch in a parallel position with the truck and then use a 1-1/8" wrench to loosen the nut and then tighten it until it stops against the gear. Then simply back the bolt off 1/8 turn and retighten the jam nut to keep everything secure. I'm attaching...
  view full answer...


• Why Are My Trailer Tires Locking Up In Reverse?
• Yes that very well may be causing your trailer to act funky. Usually when this occurs it has to do with solenoid on the reverse lockout not getting voltage. Sometimes this can be attributed from a corroded connector or your wiring has become damaged. I recommend inspecting your connectors, and ensure that there is no corrosion or damage to the connector. If there is damage, you can replace the adapter with # A10-7275VP. Additionally, if you need a new 7-way connector we do sell a variety...
  view full answer...